At+Ftpputopt Set Ftp Put Type - SimCom SIM5300E At Command Manual

Test Command
AT+FTPTYPE=?
Read Command
AT+FTPTYPE?
Write Command
AT+FTPTYPE=<value>
Parameters
Reference
11.2.4

AT+FTPPUTOPT Set FTP Put Type

AT+FTPPUTOPT Set FTP Put Type
Test Command
AT+FTPPUTOPT=?
Read Command
AT+FTPPUTOPT?
Write Command
AT+FTPPUTOPT=<value>
Parameters
Reference
SIM5300E AT Command Manual V1.02
Response
OK
Response
+FTPTYPE: <value>
OK
Response
OK
If error is related to ME functionality:
+CME ERROR: <err>
<value>
"A" For FTP ASCII sessions
"I" For FTP Binary sessions
Note:
When this value is set to A, all the data sent by the stack to the FTP
server is made of 7 bits characters (NVT-ASCII: the MSB is set to 0). As a
consequence binary data containing 8 bits characters will be corrupted
during the transfer if the FTPTYPE is set to A.
Response
OK
Response
+FTPPUTOPT: <value>
OK
Response
OK
If error is related to ME functionality:
+CME ERROR: <err>
<value>
"APPE" For appending file
"STOU" For storing unique file
"STOR" For storing file
Note
190