Table of Contents
Advertisement
Figure 68. Control panel assembly removal
Next steps
Replace the control
panel.
Installing the control panel
Prerequisites
1. Follow the safety guidelines listed in the
2. Follow the procedure listed in the
3.
Remove the primary drive bay assembly.
Steps
1. Align the 4 hooks located on the back side of the plastic panel, and insert the control panel assembly in the server chassis.
2. Slide the assembly towards the right to lock the assembly on the server chassis.
3. Using the Phillips #1 screwdriver, tighten the screws to secure the control panel assembly to the system chassis.
Figure 69. Installing the control panel assembly
92
Installing and removing system components
Safety
instructions.
Before working inside your
system.
Advertisement
Table of Contents
