Table of Contents
Advertisement
Figure 85. Dummy GPU filler installation
Next steps
Replace the GPU card into GPU
Installing the GPU into the GPU riser
Prerequisites
1. Follow the safety guidelines listed in the
2. Follow the procedure listed in the
3. If installing a new expansion card, unpack it and prepare the card for installation.
NOTE:
For instructions, see the documentation accompanying the card.
4. Remove the
GPU riser 2
5. If applicable, disconnect the cables connected to the GPU.
Steps
1. Open the PCIe card holder.
2. If installed, remove the dummy GPU filler.
NOTE:
Store the dummy GPU filler for future use. Dummy GPU filler must be installed in empty expansion card slots
to maintain Federal Communications Commission (FCC) certification of the system. The filler also keep dust and dirt
out of the system and aid in proper cooling and airflow inside the system.
riser.
Safety
instructions.
Before working inside your
or
GPU riser 1
system.
Installing and removing system components
113
Advertisement
Table of Contents
