Table of Contents
Advertisement
Figure 119. Power interposer board
1. FAN_SIG (PIB to cooling fans board)
3. BP1_PWR (PIB to primary backplane)
5. FAN_PWR (PIB to cooling fan board)
7. GPU2_PWR (PIB to GPU 2)
Removing the power interposer board
Prerequisites
1. Follow the safety guidelines listed in the
2. Follow the procedure listed in the
3. Remove the
power supply units.
4. Remove all the cables connected to the power interposer board.
NOTE:
Observe the routing of the cable as you remove it from the power interposer board.
Steps
1. Pull the plunger to disengage the power interposer board from the lock hole on the PSU cage.
2. Lift the power interposer board out of the chassis.
Figure 120. Power interposer removal
Safety
instructions.
Before working inside your
2. SLOT4_PWR (PIB to system board)
4. BP2_PWR (PIB to Second backplane)
6. GPU1_PWR (PIB to GPU 1)
8. SLOT1_PWR (PIB to system board)
system.
Installing and removing system components
143
Advertisement
Table of Contents
