Table of Contents
Advertisement
1. Follow the safety guidelines listed in the
2. If installed,
remove the front bezel.
3. Remove the drive carrier or remove the drive blank when you want to assemble the drives into the system.
Steps
1. Slide the drive carrier into the drive slot.
2. Close the drive carrier release handle to lock the drive in place.
Figure 38. Installing a drive carrier
Next steps
If removed,
install the front bezel.
Removing the drive from the drive carrier
Prerequisites
1. Follow the safety guidelines listed in the
2. If installed,
remove the front bezel cover.
Steps
1. Using a Phillips #1 screwdriver, remove the screws from the slide rails on the drive carrier.
2. Lift the drive out of the drive carrier.
64
Installing and removing system components
Safety
instructions.
Safety
instruction.
Advertisement
Table of Contents
