Nic Ports Specifications; Serial Connector Specifications; Vga Ports Specifications; Idsdm - Dell EMC PowerEdge XE2420 Installation And Service Manual

Table of Contents

Advertisement

NIC ports specifications

The PowerEdge XE2420 system supports up to two 1 Gb LAN on motherboard with 10/100/1000 Mbps Network Interface Controller
(NIC) ports that are located on the front panel. The system also supports LAN on Motherboard (LOM) on an optional riser card.

Serial connector specifications

The PowerEdge XE2420 system supports one serial connector on the front panel, which is a 9-pin connector, Data Terminal Equipment
(DTE), 16550-compliant.

VGA ports specifications

The PowerEdge XE2420 system supports one 15-pin VGA ports on the front panel.

IDSDM

The PowerEdge XE2420 system supports Internal Dual SD module (IDSDM) with the below storage capacity:
16 GB
64 GB
NOTE:
One IDSDM card slot is dedicated for redundancy.
NOTE:
Use Dell EMC branded microSD cards that are associated with the IDSDM configured systems.

Video specifications

The PowerEdge XE2420 system supports integrated Matrox G200eR2 graphics controller with 16 MB of video frame buffer.
Table 60. Supported front video resolution options
Resolution
1600 x 900 (HD+)
1366 x 768 (HD)
1680 x 1050 (WSXGA+)
1280 x 1024 (SXGA)
1440 x 900 (WXGA+)
1920 x 1080 (FHD)
1280 x 800 (WXGA)

Environmental specifications

NOTE:
For additional information about environmental certifications, see the
with the Manuals and Documents on https://www.dell.com/support.
Operational climatic range category A2
Table 61. Operational climatic range category A2
Allowable continuous operations
Temperature ranges for altitude <900 meters (<2,953 ft.
158
Technical specifications
Refresh rate (Hz)
60
60
60
60
60
60
60
Product Environmental Datasheet located
10°C–35°C (50°F–95°F) with no direct sunlight on the platform

Advertisement

Table of Contents
loading

Table of Contents