Table of Contents
Advertisement
4. Hold the card by its edges, and align the card edge connector with the expansion card connector on the riser.
5. Insert the card edge connector firmly into the expansion card connector until the card is fully seated.
6. Press the card holder to lock the card.
7. Close the PCIe card holder latch.
Figure 74. Raid card installation
Next steps
1.
Install the second drive bay assembly.
2.
Install GPU riser 2
3.
After working inside the system
.
Air shroud
Removing the air shroud
Prerequisites
CAUTION:
Never operate your system with the air shroud removed. The system may get overheated quickly, resulting in
shutdown of the system and loss of data.
1. Follow the safety guidelines listed in the
2. Follow the procedure listed in the
3.
Remove the GPU riser 2.
4. Remove the
second drive bay assembly
Steps
Hold the air shroud touch points at both ends and lift the air shroud out of the system.
96
Installing and removing system components
Safety
instructions.
Before working inside your
or
GPU riser 1
system.
Advertisement
Table of Contents
