Table of Contents
Advertisement
Figure 60. EDSFF switch backplane board removal
Next steps
Replace a EDSFF switch
backplane.
Installing an EDSFF switch backplane
Prerequisites
1. Follow the safety guidelines listed in the
2. Follow the procedure listed in the
3.
Remove all the EDSFF drives.
4. Remove all the cables that are connected to the EDSFF switch backplane.
5.
Remove the EDSFF switch backplane assembly.
Steps
1. Align the EDSFF switch backplane with the pins on the backplane assembly.
2. Slide the backplane towards the left until the plunger is engaged to lock the backplane on the tray.
84
Installing and removing system components
Safety
instructions.
Before working inside your
system.
Advertisement
Table of Contents
