Table of Contents
Advertisement
Figure 32. Front bezel tray installation
Next steps
1. If unlocked, lock the bezel tray with chassis.
2. Route the front connecting cables through the brush filters, and connect the cables to their respective ports.
System cover
Removing the system cover
Prerequisites
1. Follow the safety guidelines listed in the
Safety
instruction.
2. If installed,
remove the front bezel cover
Steps
1. Loosen the thumbscrew on the front of chassis securing the system cover.
2. Slide the system cover towards the front, and lift the system cover.
Installing and removing system components
59
Advertisement
Table of Contents
