Table of Contents
Advertisement
Next steps
1. If applicable, connect the cables to the expansion card on the interposer.
2.
Install the interposer
3.
Install the GPU riser 2
4. If applicable, connect the cables to the GPU.
5. Follow the procedure listed in the
6. Confirm that the battery is operating properly, by performing the following steps:
a. Enter the System Setup, while booting, by pressing F2.
b. Enter the correct time and date in the System Setup Time and Date fields.
c. Exit the System Setup.
d. To test the newly installed battery, remove the system from the enclosure for at least an hour.
e. Reinstall the system into the enclosure after an hour.
f. Enter the System Setup and if the time and date are still incorrect, see
Optional internal USB memory key
NOTE:
To locate the internal USB port on the system board, see the
Replacing optional internal USB memory key
Prerequisites
CAUTION:
To avoid interference with other components in the server, the maximum permissible dimensions of the USB
memory key are 15.9 mm wide x 57.15 mm long x 7.9 mm high.
1. Follow the safety guidelines listed in the
2. Follow the procedure listed in the
3.
Remove the
interposer.
Steps
1. Locate the USB port or USB memory key on the system board.
To locate the internal USB port on the system board, see the
2. If installed, remove the USB memory key from the USB port.
3. Insert the replacement USB memory key into the USB port.
Next steps
1.
Install the
interposer.
2. Follow the procedure listed in
3. While booting, press F2 to enter System Setup and verify that the system detects the USB memory key.
Power interposer board
Power interposer board
The power interposer board (PIB) is a board that connects the hot swappable power supply units (PSUs) to the system board. The PIB is
only supported in systems with redundant PSUs.
142
Installing and removing system components
After working inside your
Safety
instructions.
Before working inside your
After working inside your
system.
system.
Getting help
System board jumpers and connectors
system.
System board jumpers and connectors
section.
section.
section.
Advertisement
Table of Contents
