Table of Contents
Advertisement
Figure 99. Loosening the processor bracket
4. Lift the bracket and the processor away from the heat sink, and place the processor connector side down on the processor tray.
5. Flex the outer edges of the bracket to release the bracket from the processor.
NOTE:
Ensure that the processor and the bracket are placed in the tray after you remove the heat sink.
Figure 100. Removing the processor bracket
Next steps
Install the processor into a processor and heat sink
Installing the processor into a processor and heat sink
module
Prerequisites
Follow the safety guidelines listed in
126
Installing and removing system components
module.
Safety
instructions.
Advertisement
Table of Contents
