Table of Contents
Advertisement
Figure 90. NVME riser removal
Next steps
Replace the NVME
riser.
Installing the NVME riser
Prerequisites
1. Follow the safety guidelines listed in the
2. Follow the procedure listed in the
3.
Remove the GPU riser 2.
Steps
1. Holding the blue touch points, align the slots on the NVMe riser to the guides on the system.
2. Insert the riser edge connector firmly into the system board connector until the riser is fully seated.
3. Lift the plunger to lock the riser in place.
118
Installing and removing system components
Safety
instructions.
Before working inside the
system.
Advertisement
Table of Contents
