Table of Contents
Advertisement
Figure 78. Removing the left control panel
Next steps
1.
Replace the left control
Installing the left control panel
Prerequisites
1. Follow the safety guidelines listed in
2. Follow the procedure listed in
Steps
1. Route the control panel cable through the side wall and the guide slots in the system and connect it to the system board.
NOTE:
Route the cable properly to prevent the cable from being pinched or crimped.
2. Align and insert the left control panel assembly in the slot on the system.
3. Using the appropriate screwdriver, fasten the screws that secure the left control panel assembly.
panel.
Safety
instructions.
Before working inside your
system.
Installing and removing system components
77
Advertisement
Table of Contents
