Figure 93. Interposer installation
3. Connect the interposer cables.
Next steps
1.
Install the GPU riser 2
2.
After working inside the system
.
Removing the expansion card from the interposer
Prerequisites
1. Follow the safety guidelines listed in the
2. Follow the procedure listed in the
3.
Remove the GPU riser 2
4. Disconnect all the cables connected to the interposer.
5.
Remove the interposer
6. If applicable, disconnect all the cables connected to the expansion card.
Steps
1. Open the PCIe card holder latch.
2. Hold the expansion card by its edges, and pull the card until the card edge connector disengages from the expansion card connector
on the interposer.
Safety
instructions.
Before working inside your
system.
Installing and removing system components
121