Initializing Tpm For Users; Initializing The Tpm 1.2 For Users; Initializing The Tpm 2.0 For Users - Dell EMC PowerEdge XE2420 Installation And Service Manual

Figure 126. Installing the TPM
5. If removed, install the control panel assembly.

Initializing TPM for users

Steps
1. Initialize the TPM.
For more information, see
2. The TPM Status changes to Enabled, Activated.

Initializing the TPM 1.2 for users

Steps
1. While booting your system, press F2 to enter System Setup.
2. On the System Setup Main Menu screen, click System BIOS > System Security Settings.
3. From the TPM Security option, select On with Preboot Measurements.
4. From the TPM Command option, select Activate.
5. Save the settings.
6. Restart your system.

Initializing the TPM 2.0 for users

Steps
1. While booting your system, press F2 to enter System Setup.
2. On the System Setup Main Menu screen, click System BIOS > System Security Settings.
3. From the TPM Security option, select On.
4. Save the settings.
5. Restart your system.
150 Installing and removing system components
Initializing the TPM for users.