System Cover; Removing The System Cover - Dell EMC PowerEdge R7525 Installation And Service Manual

NOTE: The bezel key is part of the LCD bezel package.
Steps
1. Align and insert the tabs on the bezel into the slots on the system.
2. Press the bezel until the release button clicks in place.
3. Lock the bezel.
Figure 19. Installing the front bezel

System cover

Removing the system cover

Prerequisites
1. Follow the safety guidelines listed in the Safety instructions on page 26.
2. Power off the system, and any attached peripherals.
3. Disconnect the system from the electrical outlet and peripherals.
Steps
1. Using a 1/4-inch flat head or a Phillips #2 screwdriver rotate the lock counterclockwise to the unlock position.
2. Lift the release latch until the system cover slides back.
3. Lift the cover from the system.
Installing and removing system components 29