Table of Contents
Advertisement
System cover
Removing the system cover
Prerequisites
1. Follow the safety guidelines listed in the
2. Power off the system, including any attached peripherals.
3. Disconnect the system from the electrical outlet and peripherals.
Steps
1. Use a 1/4 inch flat head or a Phillips #2 screwdriver to turn the lock counterclockwise to the unlock position.
2. Open the release latch until the system cover slides back.
3. Lift the cover from the system.
Figure 15. Removing the system cover
Next steps
1.
Replace the system
cover.
Installing the system cover
Prerequisites
1. Follow the safety guidelines listed in the
2. Follow the procedure listed in the
3. Ensure that all internal cables are connected and placed out of the way, and no tools or extra parts are left inside the
system.
Steps
1. Align the tabs on the system cover with the guide slots on the chassis.
2. Close the system cover release latch.
Safety
instructions.
Safety
instructions.
Before working inside your
system.
Installing and removing system components
21
Advertisement
Table of Contents
