Table of Contents
Advertisement
Figure 36. Installing the bracket
Next steps
1. Connect all the the cables to the expander board.
2.
Install the PERC
riser.
3.
install the 2.5-inch HDD
4. If applicable,
install the 2.5-inch
5.
Install the expander
module.
6. Follow the procedure listed in
.
System cover
Removing the front system cover
Prerequisites
1. Follow the safety guidelines listed in the
Steps
1. Slide the two latches.
2. Lift the front cover.
40
Installing and removing enclosure components
backplane.
HDDs.
After working inside the
Safety
instruction.
system.
Advertisement
Table of Contents
