System Cover; Removing The System Cover - Dell EMC PowerEdge T340 DPJ1G Installation And Service Manual

Figure 21. Installing caster wheels
Next step
1 Follow the procedure listed in

System cover

Removing the system cover

Prerequisites
1 Follow the safety guidelines listed in
2 Power off the system and all attached peripherals.
3 Disconnect the system from the electrical outlet and disconnect the peripherals.
4 Place the system on a flat, stable surface.
5 Remove the front bezel.
Steps
1 Use a 1/4-inch flat head or a Phillips #2 screwdriver to turn the cover release latch counterclockwise to the unlock position.
2 Press the cover release latch, and remove the system cover.
After working inside your system.
Safety instructions.
Installing and removing system components 49