The bezel key is part of the LCD bezel package.
Steps
1. Align and insert the tabs on the bezel into the slots on the system.
2. Press the bezel until the release button clicks in place.
3. Lock the bezel.
Figure 17. Installing the front bezel with the LCD panel
System cover
Remove the system cover
Prerequisites
•
Follow the safety guidelines listed in the
•
Power off the system, and any attached peripherals.
•
Disconnect the system from the electrical outlet and peripherals.
Steps
1. Use a 0.635 cm (0.25 inches) flat head or a Phillips number 2 screwdriver to rotate the lock counterclockwise to the unlock position.
2. Lift the release latch until the system cover slides back.
3. Lift the cover from the system.
Safety instructions
on page 52.
Installing and removing system components
55