System Cover; Removing The System Cover - Dell EMC PowerEdge R240 Installation And Service Manual

Figure 10. Installing the front bezel

System cover

Removing the system cover

Prerequisites
1. Follow the safety guidelines listed in the
2. Disconnect the system from the electrical outlet and disconnect the peripherals.
3. If applicable, remove the system from the rack.
NOTE: For more information, see the Rail Installation Guide at www.dell.com/poweredgemanuals.
Steps
1. Using a 1/4 inch flat head or a Phillips #2 screwdriver, turn the lock on the release-latch counterclockwise to the unlock
position.
2. Open the release-latch until the system cover slides back.
3. Lift the cover away from the system.
Safety instructions.
Installing and removing system components 19