System Cover; Removing The System Cover - Dell EMC PowerEdge R940xa Installation And Service Manual

Next steps
1. Replace the front bezel.

System cover

System cover provides security for the entire system and also helps in maintaining proper air flow inside the system.

Removing the system cover

Prerequisites
1. Follow the safety guidelines listed in
2. Turn off the system, including any attached peripherals.
3. Disconnect the system from the electrical outlet and disconnect the peripherals.
Steps
1. Use a 1/4 inch flat head or a Phillips #2 screwdriver to turn the latch release lock counterclockwise to the unlock position.
2. Open the latch till the system cover slides back.
3. Lift the cover from the system.
Figure 27. Removing the system cover
Next steps
1. Replace the system cover.
52 Installing and removing system components
Safety instructions.