Transport And Storage Conditions - WAGO 750-666/000-003 Manual

WAGO-I/O-SYSTEM 750
750-666/000-003 4FDI/2FDO 24V/10A PROFIsafe V2 iPar
4.8.1

Transport and Storage Conditions

During transport and storage, the PROFIsafe I/O modules must be protected
against undue stress such as mechanical loads, temperature, humidity and
aggressive atmospheres.
The PROFIsafe I/O modules should be stored in the original packaging when
possible, which offers optimal protection during transport.
When picking or unpacking, do not contaminate or damage the contacts. The
PROFIsafe I/O modules must be stored and transported in suitable
containers/packaging in compliance with the ESD instructions. The devices
contain components sensitive to static discharge and can be damaged by improper
handling.
Therefore, when transporting open modules, use statically shielded transport bags
with metal coating to prevent contamination from amines, amides and silicones
such as 3M 1900E.
In addition, take the required protective measures against electrostatic discharge
(ESD) during startup and maintenance of the PROFIsafe I/O modules.
Ensure that the environment is well grounded!
The modules are equipped with electronic components that may be destroyed by
electrostatic discharge. When handling the modules, ensure that the environment
(persons, workplace and packing) is well grounded. Avoid touching conductive
components, e.g. data contacts.
Manual
Version 1.2.0, valid from HW/SW Version 01/01
Device Description 47