About This Document; Further Applicable Documents; Product Labelling; Safety - Festo EHPS LK Series Instructions & Operating

About this document

1 About this document
1.1

Further applicable documents

All available documents for the product è www.festo.com/pk.
1.2

Product labelling

Warning symbols on the product
Symbol Meaning
General warning indicator:
The symbol means a hazardous area and that the operating instructions must be read
and observed.
Tab. 1 Warning symbols on the product
2

Safety

2.1

Safety instructions

– Observe labelling on the product.
– Prior to assembly, installation and maintenance work: Switch off power supply, ensure that it is
off and secure it against being switched back on.
– Store the product in a cool, dry, UV-protected and corrosion-protected environment. Ensure that
storage times are kept to a minimum.
– Observe tightening torques. Unless otherwise specified, the tolerance is ± 20 %.
– The occurrence of a failure could lead to unforeseeable movements if the gripper is connected
with the power supply. Only operate the gripper once protective measures have been taken
against mechanical threats to body parts.
– Contrary to specification IO-Link port class B without galvanic isolation between primary and sec-
ondary power supply. This can lead to malfunction or damage to the IO-Link Master and the con-
nected IO-Link devices and must be observed during wiring.
2.2

Intended use

The intended use of the product is to grip and hold payloads (workpieces) using custom-designed
gripper fingers attached by the customer.
The gripper fingers are not included in the delivery.
When not used as intended, the product-supported protection can be impaired.
Festo — EHPS-...-LK — 2019-08 5