Downloading The Project To The Target System - Siemens SIMOTION D410 Series Commissioning Manual

A "Summary" dialog box opens with a listing of all settings after you completed all settings in
the Drive Wizard. You can now choose to activate your settings by clicking "Finish", or to
return to the component configuration for further editing.
Figure 4-10
The configured drive is displayed in the Project Navigator. An overview of your configured
SINAMICS components is available in the "SINAMICS_Integrated" > "Topology" dialog.
Refer also to
If you configure the message frames for the infeed and drive manually, you can find detailed
information on the respective message frame types in the following:
●
●
4.2.4

Downloading the project to the target system

SIMOTION D410
Commissioning Manual, 02/2012
Finishing the drive
Motion Control, TO Axis Electric/Hydraulic, External Encoder
SINAMICS S120
Function Manual
Commissioning (software)
4.2 Configuring the system in offline mode
Function Manual
81