Siemens SIMOTION D410 Series Commissioning Manual page 46

Parameter assignment / addressing
3.2 Creating a project and configuring the communication
3. In the project navigator, double-click "Insert SIMOTION device". The "Insert SIMOTION
4. In the "Insert SIMOTION device" dialog box, select the device, its version and the
5. If required, make further settings:
6. The "Open HW Config" option allows you to select whether HW Config is opened in the
7. Confirm the "Insert SIMOTION device" dialog box with "OK"
46
device" dialog box is opened:
Figure 3-1 Inserting a SIMOTION device
SIMOTION version.
– SINAMICS: for SIMOTION D410 always set SINAMICS S120 Integrated
– SINAMICS version: Select the SINAMICS Integrated version if several drive versions
are available for a SIMOTION version
next step (e.g. to configure the bus interfaces)
SIMOTION D410
Commissioning Manual, 02/2012