Siemens SIMOTION D410 Series Commissioning Manual page 47

PROFINET version
With SCOUT V4.2, for
● SIMOTION V4.0 devices, PROFINET version V2.1 is created
● SIMOTION V4.1 and V4.2 devices, PROFINET version V2.2 is created
There is no selection option in the "Insert SIMOTION device" dialog box - in special
circumstances (e.g. for existing systems) PROFINET version V2.1 can also be configured for
V4.1 CPUs. A CPU must be replaced in HW Config for this purpose.
Please note that separate SIMOTION D firmware is available for PROFINET versions V2.1
and V2.2. The required firmware can be found on the SCOUT DVD, as well as at Internet
address (http://support.automation.siemens.com/WW/view/en/31045047).
Mixed operation of the PROFINET V2.1 and V2.2 synchronization processes is not possible
in a network.
Additional references
For further information on IRT in accordance with PROFINET standard IEC 61158 V2.1 and
V2.2, refer to the
Result
If you have not yet configured a PG/PC in your project, you can select the interface for the
PG/PC connection now.
SIMOTION D410
Commissioning Manual, 02/2012
3.2 Creating a project and configuring the communication
SIMOTION Communication
Parameter assignment / addressing
System Manual.
47