Siemens SIMOTION D410 Series Commissioning Manual page 17

PROFIBUS DP
SIMOTION D410 DP can communicate via PROFIBUS DP interface to the following
components:
Table 1- 2
Component
Programming device (PG/PC) ... configures, sets parameters, programs and tests using the
SIMATIC HMI device
Drive units with
PROFIBUS DP interface (e.g.
CU310 DP)
Other controllers (e.g.
SIMOTION or SIMATIC)
Distributed I/O systems
SIMATIC ET 200M
SIMATIC ET 200S
SIMATIC ET 200pro
SIMATIC ET 200eco
Other PROFIBUS I/O
Gateways
Teleservice adapter
Note
Note that only one real axis can be used on a SIMOTION D410.
SIMOTION D410
Commissioning Manual, 02/2012
Components on the PROFIBUS DP
Function
SIMOTION SCOUT Engineering System (ES).
... is used for operator control and monitoring functions. It is not
absolutely essential for running SIMOTION D410.
... convert speed setpoints into signals for controlling the motor and
supply the power required to operate the motors.
Can also be operated as an isochronous, equidistant Slave on the
PROFIBUS DP.
Modular I/O system for control cabinet installation and high channel
densities.
Finely scalable I/O system for control cabinet installation and
particularly time-critical applications; including motor starters, safety
technology and individual grouping of load groups.
Modular I/O system with IP65/IP67 rating for machine-related
applications with no control cabinet; with new features such as more
compact designs, integrated PROFIsafe safety technology,
PROFINET connection and live module replacement.
I/O system with IP65/IP67 rating for machine-related applications
with no control cabinet, with a flexible and fast connection system in
ECOFAST or M12.
DP/AS-Interface link 20E and DP/AS-Interface link Advanced for
•
the PROFIBUS DP gateway to AS-Interface
DP/DP coupler to connect two PROFIBUS DP networks
•
Remote diagnostics
Description
1.2 System components
17