Maintenance And Service; Overview - Siemens SIMOTION D410 Series Commissioning Manual

Maintenance and service

5.1

Overview

Introduction
It is possible to distinguish between the following scenarios when replacing and updating
components:
● Replacing modules (spare part scenario)
● Adapting a project (new device type/device version)
● Performing a firmware and project update
SIMOTION D410
Commissioning Manual, 02/2012
– Spare parts replacement for SIMOTION D410 (Page 165)
– Removing and replacing the SIMOTION D410 (Page 166)
– Replacing DRIVE-CLiQ components (Page 167)
– Replacing the fan (Page 169)
– Replacing the CompactFlash card (Page 171)
The project needs to be adapted if you want to change the type (e.g. D410 DP -> D410
PN) or version of the SIMOTION device in your existing project.
– Creating backup copies (project/CF) (Page 172)
– Backing up user data (backup variables) (Page 172)
– Upgrading a user project to the new SCOUT version (Page 175)
– Platform replacement via XML export/import (Page 176)
– Preparing for a device replacement (Page 177)
– Replacing a device in HW Config (Page 178)
– Upgrading technology packages (Page 179)
– Upgrading the device version of SINAMICS S120 control units (Page 182)
– Upgrade the libraries (Page 183)
– Save project, compile and check consistency (Page 183)
– Upgrading the CompactFlash Card's bootloader (Page 184)
– Update - preparatory measures (Page 184)
– Upgrade via IT DIAG (Page 185)
– Upgrade via device update tool (upgrading SIMOTION devices) (Page 186)
– Update via CompactFlash Card (Page 188) with the steps:
5
161