Maintenance and service
5.1 Overview
Alternative: Load the project to the Compact Flash Card using a card reader
1)
See Software compatibility list (http://support.automation.siemens.com/WW/view/en/18857317).
2)
The versions of SINAMICS Integrated and Controller Extensions are upgraded automatically in the HW Config
3)
during device replacement
The technology packages are automatically upgraded. If necessary a TP can be specified by the user
4)
SINAMICS components are upgraded/downgraded to the component version of the CompactFlash Card. Observe
5)
the LED codes! After the upgrade it is necessary to switch the device off and on.
Figure 5-1
Overview of upgrade options
164
SIMOTION D410
Commissioning Manual, 02/2012