Leuze electronic BPS 34 Technical Description page 53

Leuze electronic
8.1.7.1 Module 1: Position value
Description:
With this module, the current position value is output.
Notice!
The position value is the position value calculated from the tape value and the settings for
resolution, preset and offset.
Parameter
Parameter
a
Output mode for sign.
Sign
Parameter length: 1 byte
Hex coding of module 1 "Position value"
The value listed in the table shows the hex coding of the default settings.
13
Input data
Input data
b
Output of the current position.
Position
value
Input data length: 4 byte
Notice!
A negative number is represented in the input data by a 1 in the most significant bit.
Output data
none
Leuze electronic
Buy: www.ValinOnline.com | Phone 844-385-3099 | Email: CustomerService@valin.com
Description Rel.
addr.
0
00
Description Rel.
addr.
0
Device parameters and interfaces
Data Value range
type
unsign 0: Two's complement
8 1: Sign + magnitude
Data Value range
type
sign -10'000'000 ... +10'000'000
32 (for a resolution in mm)
BPS 34
Default Unit CR to
module
0 – –
Default Unit CR to
module
0 scaled –
51