Leuze electronic BPS 34 Technical Description page 79

Leuze electronic
8.1.7.21 Module 20: Velocity
Notice!
Underlined in the CR column are the modules which must be activated in addition to the cur-
rent module.
Description
Outputs the current velocity with the configured resolution and the desired scaling factor. In
order for the velocity to be calculated in the BPS 34 and output in this module, module 22
(Control velocity) must also be activated in the PROFIBUS project.
Parameter
none
Input data
Input data
a
Current velocity
Velocity
Input data length: 4 byte
Notice!
The scaling of the position value has no effect on the scaling or output of the velocity.
The direction of movement of the BPS 34 is displayed in module 23 "Velocity measurement
status" (see page 82) under
Output data
none
Leuze electronic
Buy: www.ValinOnline.com | Phone 844-385-3099 | Email: CustomerService@valin.com
Description Rel.
addr.
0
h "Direction of movement".
Device parameters and interfaces
Data Value range
type
unsign
0 ... 10'000'000
32
BPS 34
Default Unit CR to
module
0 scaled 22
77