General information
1.3
Description of the BPS 34 functions
The BPS 34 uses visible red laser light to determine its position relative to the barcode tape.
This essentially takes place in three steps:
1.
Reading a code on the barcode tape
2.
Determining the position of the read code in the scanning area of the scanning beam
3.
Calculating the position to within a millimetre using the code information and the code
position relative to the device's centre.
The position value is then output via the interface.
4
Buy: www.ValinOnline.com | Phone 844-385-3099 | Email: CustomerService@valin.com
BPS 34
Leuze
electronic
Leuze electronic