Device Parameters And Interfaces; Profibus; General Information; Electrical Connection - Leuze electronic BPS 34 Technical Description

Device parameters and interfaces

8 Device parameters and interfaces
8.1

PROFIBUS

8.1.1

General information

The BPS 34 with MS 34 103/MS 34 105 is designed as a PROFIBUS device (PROFIBUS
DP-V0 acc. to IEC 61784-1) with a baud rate of 12 MBd. The functionality of the device is
defined via parameter sets which are clustered in modules. These modules are contained
in a GSE file. The GSE file can be downloaded from the Leuze Homepage at Leuze
website -> under the heading Download -> Logistics -> Optical barcode positioning.
By using a user-specific project tool, such as, e.g., Simatic Manager for the Siemens
programmable logic control, the required modules are integrated into a project during
commissioning and its settings and parameters are adjusted accordingly. These modules
are provided by the GSE file.
All input and output modules described in this documentation are described from the
controller's perspective:
• Input data arrives at the controller
• Output data are sent out by the controller.
8.1.2

Electrical connection

DP OUT
VCC 1
Socket
(B-coded)
Figure 8.1:Electrical connection of PROFIBUS connections DP IN and DP OUT
42
Buy: www.ValinOnline.com | Phone 844-385-3099 | Email: CustomerService@valin.com
Socket
(A-coded)
MSD
VIN
TXD
2
/INT
3
/SERV
1
5
7
GND 6
SDA
A (N)
2
GND
3
4
PE
B (P)
SW IN/OUT
RXD
4
VOUT
SCL
DP IN
A (N)
2
GND 3
VCC
1
4
PE
B (P)
Plug
(B-coded)
BPS 34
Leuze electronic
Socket
(A-coded)
SWOUT
2
GND
1 3
4
PE
PWR IN
SWIN
SWOUT
3
GND
PE
SWIN
Plug
(A-coded)
Leuze electronic
2
VIN
1
4