Mounting; Mounting The Bps 34 - Leuze electronic BPS 34 Technical Description

Leuze electronic
7

Mounting

7.1

Mounting the BPS 34

There are two different types of mounting arrangements for the BPS 34:
• Using 4 M4x6 screws on the rear of the device.
• Using the BT 56 mounting device on the fastening grooves.
Dovetail fastening grooves
4 fastening threads M 4 on the
rear of the device
Figure 7.1:
BT 56 mounting device
The BT 56 mounting device is available for mounting the BPS 34 using the fastening
grooves. It is designed for rod installation (Ø 16 mm to 20 mm). For ordering instructions,
please refer to chapter 10.6 on page 94.
Leuze electronic
Buy: www.ValinOnline.com | Phone 844-385-3099 | Email: CustomerService@valin.com
BPS 34 mounting options
BPS 34
Mounting
Laser-beam beam
hole
15-pin sub-D con-
nector on the under-
side of the unit
37