Leuze electronic BPS 34 Technical Description page 54

Device parameters and interfaces
8.1.7.2 Module 2: Resolution
Description
With this module, the resolution for the position value of module 1 is defined. The BPS 34
also performs a rounding correction (The position value is divided by the defined value
range).
Notice!
The resolution only determines the mathematical decimal value and has no effect on the
measurement accuracy.
Parameter
Parameter Description
The parameter specifies the
a
resolution for the position value.
The resolution has no effect on
Resolution
- Static preset
in [mm]
- Dynamic preset
- Offset
Parameter length: 1 byte
Hex coding of module 2 "Resolution"
The value listed in the table shows the hex coding of the default settings.
0A
Input data
none
Output data
none
52
Buy: www.ValinOnline.com | Phone 844-385-3099 | Email: CustomerService@valin.com
Rel. Data
addr. type
unsign
0
8
03
BPS 34
Value range
1: 0.01
2: 0.1
3: 1
4: 10
5: 100
6: 1'000
Leuze electronic
Default Unit CR to
module
3 mm
Leuze electronic
–