Working Safely - Leuze electronic BPS 34 Technical Description

Safety notices
Areas of application
The barcode positioning system BPS 34 has been developed for positioning tasks in the
following areas of application:
• High-bay storage devices: Positioning in the travel and lifting axes
• Crane bridges and trolleys
• Side-tracking skates
• Telpher lines
• Lifts
2.4

Working safely

Attention!
Access to or changes on the device, except where expressly described in this operating
manual, are not authorised.
Safety Regulations
Observe the locally applicable legal regulations and the rules of the employer's liability insur-
ance association.
Qualified personnel
Mounting, commissioning and maintenance of the device may only be carried out by quali-
fied personnel.
Electrical work must be carried out by a certified electrician.
Attention, laser radiation!
Warning: The barcode positioning system BPS 34 operates with a red light laser of
class 2 acc. to EN 60825-1. If you look into the beam path over a longer time period,
the retina of your eye may be damaged!
Never look directly into the beam path!
Do not point the laser beam of the BPS 34 at persons!
When mounting and aligning the BPS 34, take care to avoid reflections of the laser
beam off reflective surfaces!
Heed the laser safety regulations according to DIN EN 60825-1 in their most current
version! The output power of the laser beam at the reading window is at most 1.8 mW
acc. to EN 60825-1.
The BPS 34 uses a laser diode with low power in the visible red light range with an
emitted wavelength of 650 ... 690 nm.
Attention!
CAUTION! The use of operating and adjusting devices other than those specified here
or carrying out of differing procedures may lead to dangerous exposure to radiation!
6
Buy: www.ValinOnline.com | Phone 844-385-3099 | Email: CustomerService@valin.com
BPS 34
Leuze electronic
Leuze electronic