Safety Notices; General Safety Notices; Safety Standards; Intended Use - Leuze electronic BPS 34 Technical Description

Leuze electronic
2

Safety notices

2.1

General safety notices

Documentation
All entries in this technical description must be heeded, in particular those in section "Safety
notices". Keep this technical description in a safe place. It should be accessible at all times.
Safety regulations
Observe the locally applicable legal regulations and the rules of the employer's liability insur-
ance association.
Repair
Repairs must only be carried out by the manufacturer or an authorised representative.
2.2

Safety standards

The devices of the BPS 34 series were developed, manufactured and tested in accordance
with the applicable safety standards. They correspond to the state of the art.
2.3

Intended use

Barcode positioning systems of the BPS 34 series are optical measuring systems which use
visible red laser light to determine the position of the BPS relative to a permanently mounted
barcode tape.
The modular hoods with integrated connectors MS 34 103/MS 34 105 are intended for the
easy connection of barcode positioning systems of type BPS 34 in a PROFIBUS system.
The modular service display MSD 1 101, which is optionally available, displays operational
data of the BPS 34 and is used as a simple means of access to the service interface of the
MS 34 105.
In particular, unauthorised uses include:
• rooms with explosive atmospheres
• operation for medical purposes
Attention!
The protection of personnel and the device is guaranteed only if the device is operated in a
manner corresponding to its intended use.
Leuze electronic
Buy: www.ValinOnline.com | Phone 844-385-3099 | Email: CustomerService@valin.com
BPS 34
Safety notices
5