Connector Units Ms 34; Modular Hoods With Integrated Connectors Ms 34 103 And Ms 34 105; General Information; Specifications Of The Connector Units - Leuze electronic BPS 34 Technical Description

Connector units MS 34 ... / MSD 1 101
5 Connector units MS 34 ... / MSD 1 101
5.1

Modular hoods with integrated connectors MS 34 103 and MS 34 105

A modular hood of type MS 34 103 or MS 34 105 with integrated connectors is part of every
BPS 34. The two hoods with integrated connectors are used to connect the BPS 34 to the
PROFIBUS. For this, they feature one DP IN and one DP OUT connection each, as well as
switches for address setting.
If only the connection to the PROFIBUS is intended, type MS 34 103 is sufficient.
If, in addition, switching input/output or a modular service display are to be connected, an
MS 34 105 is required. Although switching input and output are available on the voltage
supply connector PWR IN, the switching input of the MS 34 105 has the advantage that a
standard sensor connector can be used.
5.1.1

General information

The modular hoods with integrated connectors are necessary accessories for connecting a
BPS 34 in a PROFIBUS system. On the MS 34 10x, the PROFIBUS is connected, the
PROFIBUS address set and the BPS 34 supplied with voltage.
MS 34 103
The MS 34 103 offers the following interfaces:
• PROFIBUS incoming DP IN
• PROFIBUS outgoing DP OUT
• Voltage supply PWR IN with switching input and switching output
MS 34 105
In addition to the MS 34 103, the MS 34 105 offers the following interfaces:
• for the modular service display MSD
• M 12 connection for switching input and switching output SW IN/OUT
5.1.2

Specifications of the connector units

Mechanical data
Protection class
Weight
Dimensions (W x H x D)
Housing
1) with M12 connectors/caps screwed into place
22
Buy: www.ValinOnline.com | Phone 844-385-3099 | Email: CustomerService@valin.com
1)
IP 65
160 g
38 x 90 x 39 mm
diecast zinc
BPS 34
Leuze electronic
Leuze electronic