Figure 2-8 Coral Card Slot Position To I/O Cable Pair Relationship - Tadiran Telecom Coral FlexiCom 6000 Installation Procedure And Hardware Reference Manual

Figure 2-8 Coral Card
Slot Position to I/O Cable
Pair Relationship
2-24
Hardware Installation Procedure
5. Mark each I/O cable near the connector on the backplane with the
corresponding peripheral shelf and I/O connector number on the Coral system.
6. Terminate each of the cables on their respective cable punch blocks on the
MDF.
7. Mark each cable punch block with the corresponding I/O connector number on
the Coral system. Optionally mark every eighth pair on the block, starting with
the first pair, with the number of the two card slots associated with the I/O
cable, according to
8. Attach the front, decorative panel nameplate and rear cabinet panel at the top
of the cabinet front and rear, see
Pair Pairs
25/50 17/42-24/49
17
25
ports 0-7
42
50
NOT
EVEN SLOTS
USED
4,6,8,10,12,14,16,18
25
17
ports 16-23
42
50
Ensure that each I/O cable is secured with its own hook-and-loop fastener
strap on the Coral cabinet rear, so that the cables do not accidentally pop out
of place.
Table 2-4 andFigure 2-8.
Figure 2-5
Pairs
9/34-16/41
9
ports 16-23
34
3,5,7,9,11,13,15,17
9
ports 8-15
34
Coral FlexiCom 5000, 6000
and lock into place.
Connector
Pairs
Pins
1/26-8/33
1
UPPER
ports 0-7
CONNECTOR
26
ODD SLOTS
1
LOWER
ports 8-15
CONNECTOR
26
Coral FlexiCom 6000 Installation Manual