Tadiran Telecom Coral FlexiCom 6000 Installation Procedure And Hardware Reference Manual page 100

3-14
Initial Power-Up Tests
Messages for a Properly Loading Standby Side
The Standby side loads first as a FAULTY system and after a few seconds switches to
Standby mode. The following messages reflect this situation.
Loading ...
OMF 80286/80386 LOADER V2.01
Copyright 1992, Tadiran Corporation
Loading /work/k.om8
Loading /work/d.om8
Loading /work/au.om8
Loading /work/p.om8
End Loading File...!
Start Build Checksum
End Build Checksum
Start Set CC
END Set CC
CHECKING SAU #
END CHECKING SAU #
CHECKING ATS CONTROLS
END CHECKING ATS CONTROLS
Check Patch Flag...!
Patch Loaded...!
Start Set CC
END Set CC
CHECKING SAU #
END CHECKING SAU #
CHECKING ATS CONTROLS
END CHECKING ATS CONTROLS
CHECK CHECKSUM...
END CHECK CHECKSUM
Attaching Device...............
Attaching Files...............
This is a HOT STAND BY SYSTEM
Initializing CCS ...
First Initialization starting ............
First Configuration phase completed ......
Partial initialization phase starting
Coral FlexiCom 6000 Installation Manual