Tadiran Telecom Coral FlexiCom 6000 Installation Procedure And Hardware Reference Manual page 108

Table 3-1 Card Slot
Status Messages
3-22
Initial Power-Up Tests
.
Displayed Description
Message
Initialization was successfully
ACTIVE
completed.
Card is partially active because there
ACTIVE/P
are not enough resources to support
the other sub circuits on an
8DRCM/8DRCF card or not all tone
generators are being used on the iDSP
card.
P_TYPE and I_TYPE are not
REPLACED
compatible.
Card has not received database, or
WAIT_DB
has not reported initialization.
Insufficient system memory to initialize
NO_RESOURCES
card.
HDLC problem
FAULT
The SAU ports are limited and
UNAUTHORIZED
therefore the card is not authorized for
use in this system.
Technical
Recommendations
None
Readjust SIZES to
support unsupported
sub circuits for
8DRCM/8DRCF card.
Partial Active for the
iDSP card is not
critical. Readjust the
parameter value only
when needed.
Install proper card or
enter NO_CARD in
the I_TYPE option.
Continue waiting
Check SIZES
Check HDLC wiring
Install an updated
version of the SAU
with the appropriate
amount of ports
added. Ask your
dealer for an
authorized upgrade.
Coral FlexiCom 6000 Installation Manual