Replacing The Print Head; Replacing The Ink Tray - Pitney Bowes Mailstation 2 Operator's Manual

Replacing the Print Head

This procedure should only be done under the direction
IMPORTANT:
or with the permission of a Pitney Bowes representative.
Menu
1. Press
2. Use the Review keys to scroll to "Use ink functions?" and press
Enter/yes.
3. Use the Review keys to scroll to "Install new print head?" and press
Enter/yes.
4. Open the top cover and locate print head.
5. Refer to the instructions that came with new print head to remove
the old print head and install the new one.
6. Press Enter/yes to confirm the replacement. A print head
initialization occurs which lasts about 2-3 minutes.
7. When prompted, insert an envelope/tape sheet to print a test pattern
to confirm print quality.
8. If test pattern looks good, press Enter/yes.

Replacing the Ink Tray

IMPORTANT: This procedure should only be done under the direction or
with the permission of a Pitney Bowes representative.
Menu
1. Press
2. Use the Review keys to scroll to "Use ink functions?" and press
Enter/yes.
3. Use the Review keys to scroll to "Replace ink tray?" and press
Enter/yes.
4. Refer to the instructions that came with new ink tray to remove the
old ink tray and install the new one.
Press Enter/yes when completed.
5.
mailstation 2 Digital Postal Meter | SV61983 Rev. H
™
8 ● Ink Installation and Maintenance
.
.
8-5