11. Remove door channel seal on inside
Pull the door channel seal on the inside off the bead of the door
channel.
12. Remove lid
Press out the 24 x 40 lid −A− and the 20 x 28 lid −B− with a plastic spatula.
13. Remove wiring harness
ab. Unclip the electrical wiring along the inner door
panel.
ac. Pull wiring harness out of the door in the −direction of the
arrow− .
14. Remove angle piece
Unscrew T 45 M8 x 33 Torx screw from the angle piece and the 12 x 8 x 7 centring sleeve.
top of page
Disassembling door
einordnung
1455