Porsche 996 TT Repair Manual page 1511

3 Undoing locking screw
as of model year 2001
4 Undoing locking screw
up to model year 2000
No. Procedure
1 Engaging the door
up to model year
2000
2 Engaging the door
as of model year
2001
57 51 19 Removing and installing door
Insert special tool ' No.9666, 2.4 (angle screwdriver) into the
upper door hinge and counter. Unscrew locking screw from the
lower door hinge and lift the door upwards out of the hinges.
Unscrew locking screw from the door hinge and lift the door
upwards out of the hinges.
Instructions
Engage the door in the door hinge from above and screw in the locking screw.
Note: the locking screw is microencapsulated and must be replaced every time
it is unscrewed.
Tightening torque −10 Nm (7.5 ftlb.)−
Engage door in door hinge from above, screw in locking screw and tighten
with −13 Nm (9.5 ftlb.)− .
Note: the locking screw is microencapsulated and must be replaced every time
it is unscrewed.
einordnung
1448