Codabar Start Stop Character Set
Codabar Start Stop Character Set
This feature specifies the format of transmitted Codabar start/stop characters.
Options are:
•
•
•
•
To set this feature:
1. Scan the Enter/Exit Programming Mode barcode at the top of the page.
2. Scan the barcode below or from the following page representing the
3. Complete the programming sequence by scanning the ENTER/EXIT Pro-
022E01(CR)
Codabar Start Stop Character Set = ABCD/ABCD
022E03(CR)
Codabar Start Stop Character Set = abcd/abcd
Product Reference Guide
ABCD/TN* E
ABCD/ABCD
abcd/tn* e
abcd/abcd
desired option. You'll need to cover any unused barcodes and facing
pages to ensure that the scanner reads only the barcode you intend to
scan.
gramming Mode barcode.
Enter/Exit Programming Mode
022E00(CR)
Codabar Start Stop Character Set = ABCD/TN* E
022E02(CR)
Codabar Start Stop Character Set = abcd/tn* e
DEFAULT
219