Inverse Read Control - Datalogic Magellan 1500i Product Reference Manual

2D Inverse Read Control
2D Inverse Read Control
This configuration item is used to toggle inverted label reading for 2D bar-
codes, for example, a label printed as white on black as opposed to black on
white.
To set this feature:
1. Scan the Enter/Exit Programming Mode barcode at the top of the page.
2. Scan your selection from the barcodes below. You'll need to cover any
3. Complete the programming sequence by scanning the Enter/Exit Pro-
DEFAULT
040C01(CR)
2D Inverse Read Control = Enable
Product Reference Guide
unused barcodes on this and the facing page to ensure that the scanner
reads only the barcode you intend to scan.
gramming Mode barcode.
Enter/Exit Programming Mode
040C00(CR)
2D Inverse Read Control = Disable
23