I 2 Of 5 Length 1 - Datalogic Magellan 1500i Product Reference Manual

I 2 of 5 Length 1

I 2 of 5 Length 1
If I 2 of 5 Length Control is set to Fixed-Length decoding, this feature specifies
I 2 of 5 first fixed length. If I 2 of 5 Length Control is set to Variable-Length
decoding, this feature specifies the minimum label length.
To set this feature:
1. Scan the Enter/Exit Programming Mode barcode at the top of the page.
2. Scan the barcode,
3. Scan the appropriate digits from the
4. Complete the programming sequence by scanning the ENTER/EXIT Pro-
DEFAULT
Product Reference Guide
Set I 2 of 5 Length 1 on page 215
cover any unused barcodes on this and the facing page to ensure that the
scanner reads only the barcode you intend to scan.
that represent the desired label length. The selectable range for this
option is 02 to 50, even numbers only. Pad all single digit numbers with a
leading zero to yield a two-digit entry (02-50).
gramming Mode barcode.
Enter/Exit Programming Mode
below. You'll need to
Alpha-Numeric Keypad in Appendix C
0056(CR)
Set I 2 of 5 Length 1
Default setting for this feature = 06
215