Enter/Exit Programming Mode
DataBar Expanded Length 1
Length 1 is the minimum label length if in variable length mode, or the first
fixed length if in fixed length mode. Length includes the barcode's data charac-
ters only.
To set this feature:
1. Scan the Enter/Exit Programming Mode barcode at the top of the page.
2. Scan the barcode,
3. Scan the appropriate digits from the
4. Complete the programming sequence by scanning the ENTER/EXIT Pro-
DEFAULT
184
Set DataBar Expanded Length 1 on page 184
You'll need to cover any unused barcodes on this and the facing page to
ensure that the scanner reads only the barcode you intend to scan.
that represent the desired label length. The selectable range for this
option is 00 to 74. Pad all single digit numbers with a leading zero to yield
a two-digit entry (00-74).
gramming Mode barcode.
DataBar Expanded Length 1
Alpha-Numeric Keypad in Appendix C
04BE(CR)
Set DataBar Expanded Length 1
Default setting for this feature = 01
below.
Magellan™ 1500i