Illumination Blank On Beep - Datalogic Magellan 1500i Product Reference Manual

Illumination Blank on Beep

Illumination Blank on Beep
Enable this feature to turn off illumination while sound is playing.
To set this feature:
1. Scan the Enter/Exit Programming Mode barcode at the top of the page.
2. Scan your selection from the barcodes below.
3. Complete the programming sequence by scanning the Enter/Exit Pro-
DEFAULT
150E01(CR)
Illumination Blank on Beep = Enable
Product Reference Guide
gramming Mode barcode.
Enter/Exit Programming Mode
150E00(CR)
Illumination Blank on Beep = Disable
45